High-Pressure Booster PumpGreat for cleaning and spraying!  
This pump increases water pressure from city mains, private water systems or from tanks or ponds, with suction lifts up to 10' (not self-priming). Cast iron construction with stainless steel shafts and Delrin® impellers. It can handle inlet pressure to 80 psi. Maximum outlet pressure is 305 psi (690'), 3/4" FNPT in/out. Single-phase units include an 8', 115V power cord. Two-year warranty. Made in USA.
Booster pump selection guide. - Determine pressure boost required above existing pressure.
- Determine gpm needed to be pumped.
- Read across top to pressure boost required.
- Read down column to select gpm required.
Example:
You have 25-psi supply and require 10 gpm @ 100 psi. Your boost requirement is 75 psi. Read across top to 75 psi, read down column to 10 gallons required, select 3/4 hp unit. 3-Phase Equipment
We highly recommend using protective devices with all 3-phase equipment. Motor starters, phase monitors and phase protectors are not included in the sale and should be sourced locally. Failure to install protective devices will void most warranties. We also recommend that a certified electrician perform the installation. - Determine pressure boost required above existing pressure.
- Determine gpm needed to be pumped.
- Read across top to pressure boost required.
- Read down column to select gpm required.
Example:
You have 25-psi supply and require 10 gpm @ 100 psi. Your boost requirement is 75 psi. Read across top to 75 psi, read down column to 10 gallons required, select 3/4 hp unit. |
|
Click image to view larger image |
