| Your Name* | |
| Your Email* | |
| Company Name | |
| Project Name | |
| Mailing Address* | |
| City* | |
| State* | |
| Zip | |
| Country* | |
| Phone* | |
| Fax* | |
| | Please enter the following code in the box below: UVMLQ
This tells us that you are a real person, not a web-robot. |
| Code* | |
| Project Name | |
| Fresh Water | Salt Water |
| Electrical Information: |
| Voltage | |
| Amps Available | |
| Cycles per Second | 50Hz 60Hz Phasing |
| Is your system ? | Flow-Through Recirculation |
| Fill in this section if your system is flow-through: |
| | C° F° Incoming Water Temperature |
| C° F° Desired Water Temperature |
| | Insulated Uninsulated tank |
| gpm lpm Flow Rate |
| Hours of Operation |
| C° F° Highest Ambient Air Temperature to Which Water Tanks Are Exposed |
| | Single pass Partial Recirculation with Reservoir |
| gpm lpm Recirculated |
| Fill in this section if your system is recirculation: |
| gal liters Total Volume in Entire System |
| C° F° Desired Water Temperature |
| C° F° Initial Water Temperature |
| Tank Construction (Glass, Wood, Cement, etc.) |
| Relationship of Tanks to Chiller (Close by, Far Away, Next Room, etc.) |
| lbs. kg. Total Weight of Organisms in Systems |
| Species and Size |
| | Indoor Outdoor |
| °C °F Highest Ambient Air Temperature to Which Tanks Are Exposed |
| °C °F Incoming Water Temperature |
| Hours Pull-Down Time (Time Needed to Get to Desired Temperature) |
| | Insulated Uninsulated Tank |
| Thickness or R-value of Insulation (if Known) |
| Size of Pump On System, hp, Flow Rate at Operating psi |
Please describe your application in detail.
|
|
